PHONE:
0512-58581137 +86-13151198265
E-MAIL:
SKYPE：
zhujingke@hotmail.com
- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
| Quantity: | |
|---|---|
Product Description
The Portable RV Solar Panel from EFI provides mobile power generation for recreational vehicles and remote applications, constructed with Aluminum 6063 and Stainless Steel 304 structural components. This system converts solar irradiance into electrical energy for storage in battery banks, supporting power access in locations without grid connection. The product is designed for commercial users supplying RV aftermarket channels, fleet operators, and outdoor equipment distributors serving travel trailer, motorhome, and camper van segments.
This solar panel system supports electrical loads in RVs including 12V refrigeration units, LED lighting systems, water pumps, and consumer electronics charging. The design eliminates dependency on internal combustion generators and campground electrical hookups, reducing fuel consumption and noise output during extended stays. Power output is sized to match typical RV battery bank configurations, with charging profiles compatible with standard lead-acid and lithium battery chemistries.
Beyond recreational vehicle use, the panels support remote work sites, emergency response units, marine applications, and temporary event power setups. For commercial fleets including work trucks and service vans, the panels maintain battery charge for equipment during field operations without idling engines. The folding frame design enables storage in standard vehicle compartments when not in deployed.
All structural components use Aluminum 6063 with T5 temper, with Stainless Steel 304 fasteners to prevent galvanic corrosion in outdoor environments. The frame incorporates corner reinforcements and tempered low-iron solar glass with anti-reflective coating. Junction boxes carry IP65 ingress protection rating for exposure to rain and road spray. The following table represents original manufacturer specifications for structural components:
Material | Aluminum 6063/Stainless steel 304 |
|---|---|
Temper | T5 |
Manufacturing Equipment | CNC,sawing,deburring,punching,tapping,chamfering machines |
Surface Treatment | HDG(hot dipped galvanized),Pre-galvanized,Electrical-galvanized(yellow or white),powder coating(Black,Green,White,Grey,Blue)etc. |
Usage | LED light industry,solar panel industry,sanitary ware industry,auto part industry,heat sink industry and etc. |
Dimensions | Customized |
Lengths | Either 20FT or 40FT or cut into the length according to clients'requirements |
Thickness | Above 0.7mm or customized. |
MOQ | 1000 Pieces |
Warranty | 10 years warranty and service life of 20 years |
Standard configurations operate at 18V nominal output for 12V battery charging, with module efficiencies ranging from 19-22% depending on cell selection. Bypass diodes are integrated to minimize power loss from partial shading conditions. Cable assemblies use UV-resistant PV wire with MC4 compatible connectors. Output tolerance is maintained within ±3% across production batches.
The folding panel design enables deployment by one person in under five minutes, with adjustable kickstand legs providing tilt angles from 0-60 degrees for seasonal sun angle optimization. No permanent mounting or drilling is required for temporary deployment. For permanent roof mounting on RVs, compatible bracket kits are available separately. The included 5m cable set allows flexible positioning relative to battery connection points.
The panels are tested to withstand wind loads up to 150km/h and snow loads of 1.2kN/m² when in the stowed position. Operating temperature range is -40°C to +85°C, with anodized aluminum frames providing corrosion resistance in coastal and high-humidity environments. The junction box and cable assemblies maintain flexibility through repeated temperature cycling.
Production follows ISO 9001 quality management systems, with CE certification for European market access. Each production batch undergoes electroluminescence testing to detect cell microcracks, plus high-potential testing for electrical insulation integrity. Frame dimensions are verified with CNC coordinate measuring to ensure mounting hole alignment.
Structural frames carry a 10-year material warranty, with power output warranty of 25 years at 80% minimum rated output. Expected service life in mobile applications is 20 years under normal operating conditions. Warranty claims require product serial number and installation documentation for processing.
Sample orders are available for evaluation, with production runs starting at 100 units for private label configurations. Customization options include frame color, cable length, connector type, and branded packaging. Panel wattage can be specified from 100W to 400W per folding unit based on customer requirements.
Standard export packaging uses individual cartons with corner protection, palletized for container loading. Typical production lead time is 15-20 working days for standard specifications. FOB Shanghai terms are available, with documentation provided for customs clearance including commercial invoice, packing list, and certificate of origin.
The panels work with 12V/24V lead-acid, AGM, gel, and lithium iron phosphate battery systems when paired with an appropriate charge controller. Charge controllers are available separately or as part of complete system kits.
Standard folding units can be removed from storage, positioned, and connected to the battery system in 3-5 minutes by one person with basic product familiarity.
Integrated bypass diodes isolate shaded cell strings, reducing power loss compared to panels without this protection. For optimal performance, positioning in full sun is recommended.
Standard units include adjustable aluminum kickstand legs, 5m PV cable with MC4 connectors, and instruction manual. Permanent roof mounting brackets and charge controllers are ordered separately.
